Application:
Civil Engineering
Industrial & Residential Building Site
Basements Or Other Utility Pits
Rain Water & Mud Water
General Pumping Purposes

Specification:
Max Head:  Up to 11 meter
Max Flow: Up to 125 LPM
Power: 0.55 KW (0.75 HP)
Power supply: Single phase 220V-240V, 50Hz
Outlet : 1"
Insulation class: F
Protection class: IP68
Water temperature: up to 40°C
Minimum Water level: 1 mm
Cable length : 8m
Speed : 2900 RPM

Installation and use : 

PSDP series pump is a portable submersible residue drainage pump. There is a one-way valve in the bottom inlet to prevent the water in the pipeline from flowing back. The minimum water level can be pumped to 1mm.

PSDP pump adopts lightweight design. The small outer diameter allows it to be used in an 8-inch well. The components of PSDP series are made of wear-resistant rubber and ductile iron, which is with excellent durability. The water is sucked from the bottom and discharged from the top through the inner layer between the motor case and the water jacket, which provides the highest cooling efficiency for the motor and allows continuous operation at low water level. A large gap is between the semi open impeller and the pump body, so the impeller will not easily be stuck by mud or sand. The hose coupling could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.

*For more information download the catalog

For Product Price

Connect With Us Download Brochure