Applications :

• Civil Engineering
• Industrial & Residential Building Site
• Basements Or Other Utility Pits
• Rain Water & Mud Water
• General Pumping Purposes
  
  

Specification :

Max Head: 14.5 meters
Max Flow: 300 LPM
Power: 0.75 kW / 1.0 HP
Power supply: Single phase 220V-240V, 50Hz
Outlet: 2"
Insulation class: F
Protection class: IPX8 / IP68
Water temperature: up to 40°C
Minimum Water level: 1 mm
Cable length: 8m
Speed: 2900 RPM

Installation and use:

PSDP series pump is a portable submersible residue drainage pump. There is a one-way valve in the bottom inlet to prevent the water in the pipeline from flowing back. The minimum water level can be pumped to 1mm.

PSDP pump adopts a lightweight design. The small outer diameter allows it to be used in an 8-inch well. The components of the PSDP series are made of wear-resistant rubber and ductile iron, which have excellent durability. The water is sucked from the bottom and discharged from the top through the inner layer between the motor case and the water jacket, which provides the highest cooling efficiency for the motor and allows continuous operation at a low water level. A large gap is between the semi-open impeller and the pump body, so the impeller will not easily get stuck by mud or sand. The hose coupling could be installed vertically or obliquely to prevent the soft hose pipe from folding or bending.

• Note: Please irrigate 2.5 liters of water into the pump before initial operation.

*For more information, download the catalog

For Product Price

Connect With Us Download Brochure