Prakash 6” Submersible Motor

Connect With Us

WhatsApp Us
SKU: PSM100-1 Category:



  • Irrigation in horticulture and agriculture
  • Drip and sprinkler irrigation
  • Pressure boosting application
  • Water treatment
  • Civil and industrial application



  • Water temperature : Up to 35°C
  • Minimum internal diameter of well:6” Ø150mm.
  • Power : 4.0Kw to 45kw
  • Power Supply: Three phase 380V-415V ±10%, 50 Hz.
  • Insulation Class: B
  • Protection Class : IP 68
  • Maximum immersion depth : 450m
  • No of starts per hour: 25
  • Rotating: CCW and CW.
  • Standard motor with poly wrapping insulated
  • winding
  • Ambient temp. of 30°C with a min. Cooling
  • flow: 4.0Kw -15kw V=0.2m/s ,18.5Kw -37kw V=0.5m/s
  • Installation position : Vertical/Horizontal
  • Duty: S1

Product Feature

  • Easily rewind able (wet wound) induction motor with PVC/ Poly wrapping insulated winding.
  • Water lubricated radial and thrust bearing.
  • Corrosion resistance stainless steel stator jacket.
  • Non-contaminating water filling design.
  • High efficiency electrical design for low operation cost.
  • Tropical zed design. (Lower winding temperature)
  • 6” NEMA flange with stud M12.
  • Cable material according to drinking water regulation.
  • All motors prefilled and 100% tested.
  • Sand slinger for high performance in sand.


There are no reviews yet.

Be the first to review “Prakash 6” Submersible Motor”

Your email address will not be published.